Electronic Control Module

To carry out major works fit saws with a cutting depth of 55 mm. Circular saws, cutting depth which is greater than 65 mm is classified as a class construction and purchase of such equipment will be justified only if you often have to cut very thick material. The more expensive models of circular saws are equipped with control electronics. Electronic Control Module allows you to maintain a constant speed regardless of load and produces a soft-start motor. This feature provides additional convenience at work, as well as prolongs the life of saw blade (in the case congestion or blockages, electronics, motor off).

Also, there are circular saws with adjustable speed blade. This feature extends the scope of circular saw and can select the optimum speed for each material. Now, virtually every major manufacturer such as such as Festool, or such as Protool, publishes a special frame for hand-held circular saws, with the help of a frame can easily be turned into a handsaw stationary (in this case, the saw is fixed up disk). In conclusion, let me give you some tips on working with circular saw. In carrying out precision work using fabrics with lots of teeth, this will ensure a smooth and clean drink.

Discs with a small number of teeth should be used if you want to a lot of work with high efficiency. If you plan to work with plastic, keep in mind that the speed of the disc should not exceed 3000 – 4000ob/min, in this case will be very useful function such as regulation speed. Cutting plastic, plasterboard, thin aluminum sections shall be made by special circular saw blades. Such drives usually have a special sharpening carbide plates and a large number of teeth. Working a circular saw, use a special bag to collect sawdust dust. For this purpose, so you can use a vacuum cleaner, although it somewhat limits the freedom of movement, but more efficiently remove dust. We hope this overview has helped you understand the technical characteristics of circular saws. But the choice is yours.