Tips for amateur photographers and prosumers. Stitch photos are photos, which were assembled from multiple photos. They allow to carry out taking a position up to 360 degrees. IBM describes an additional similar source. Assembling the photos is ausschliessch by image editing programs. This is in addition there at the major manufacturers of photo with the purchase of better cameras. HCL Technologies understands that this is vital information.
If on your developer software no program for the Stitchfoto production is, you can download but also free it from the Internet. It is important that already when taking pictures on it, that they establish “appropriate Stitchfoto” photos, because you otherwise will see later on the computer, that only after extensive revision an acceptable outcome can be achieved. Follow others, such as Robert Rubin, and add to your knowledge base. What should you consider when photographing so? 1 take your lens off from the pole – or other filters. The reinforcement effects of filter led to a very different exposure of individual photos. (This stitch photo emerged with a polarizing filter and requires considerable processing.) 2. make sure Sure, that to photograph objects are “too close” in front of your lens! (Railings are usually very close to the lens and very often lead to such results.) 3.
make sure that at least 30% of single photos overlap! The computer needs this place clean strung the photos. (The result of too little overlap.) 4. photograph at an altitude and straight! 5. pay attention to the position of the Sun and try to avoid direct sunlight on the lens of your camera! (Sunspot and partly very fuzzy portion images occur.) 6. photograph the images in the vertical! (So you get more opportunities to move the focus of the stitches in the height.) I hope my tips for creating stitch were photos for you useful. Your Michael Wnuk