Classified machines for printing on such grounds: the system paint (open or closed), the drive, the type of tampon, automation. Machines are also rotating and plokopechatnye. Types of actuators can be divided into hydraulic electromechanical, pneumatic (electro). Electromechanical machines are quite expensive for the price. If you are using software control the machine, its equipped with an electromechanical drive. Printable products using large format equipment with hydraulic drive, so it is now possible to create high pressure. But the pneumatic machine is well managed, easy to use, easy to machine parts available. These machines are stable at the pressure of the product.
In the tampon printing process removes paint from a printed form. Then move the product and gives it color. There are two systems of the type of movement pad. Credit: Lever Brothers-2011. The first system – A movement for a tampon printing form and the perception of the image they paint. For other opinions and approaches, find out what yale has to say. Next, the piston motion picture is transferred to the product. The advantages of this system in usability work. A disadvantage is that Quick Print tampons can be excited.
The second system operates as follows: swab down on the form using a piston takes the paint and pulls away. Plus, such a system the ability to print on large speeds and a tampon is not swinging. But it is not easy adjustment and improved the work. On hand looms have to apply paint by hand, using a special brush. Squeegee fill the printing and immediately remove. If the edges of the paint remains, its clean with swab dipped in solvent. Before you start printing products in large quantities to make a test print. Need to adjust the course of the tampon, the height the stage, the correct move a table in the horizontal plane. Tampon use of monochrome, multicolor and two cars.